Algemene specificaties
Peak Power
1500W
Audio Specificaties
2-Ohm Power Output
600Wrms x 1, <0.1% THD+N
Signal-to-Noise Ratio
>80dB (ref 1W output @ 2 )
4-Ohm Power Output
380Wrms x 1, <0.1% THD+N
- 1 versterker
- 1 bedieningspaneel voor montage in het voertuig
- 2 extra zekeringen
- Handleiding
GTR mono en full-range, meerkanaals Clari-Fi™ verbeterde versterkers leveren de hoge efficiëntie en het vermogen die je verwacht van Klasse D versterkers—en de prestaties die je gewend bent van JBL. Elk model in de opstelling accepteert hoog-niveau of laag-niveau ingangen, waardoor de JBL Stadium-versterkers kunnen worden toegevoegd aan vrijwel elke autoradio, inclusief fabrieksgeïnstalleerde systemen. De 4- en 5-kanaals versterkers bieden Bluetooth® audiostreaming, exclusieve Clari-Fi™ music restoration-technologie die de audiokwaliteit van gecomprimeerde bestanden in realtime analiseert en verbetert; een multi-koppeling Party Modus waarmee iedereen in de auto muziek kan streamen; en een in het voertuig ingebouwd bedieningspaneel. GTR-versterkers geven je het vermogen om de audio-ervaring in je auto op een nieuwe manier vorm te geven.
Handleidingen en Downloads
De laatste gebruikershandleidingen, beknopte handleidingen en documenten.
Search Result For ""
GTR-601 heeft als beoordeling
van de
5 door
1.
Rated 5 van de
5
door
JBL4LIFE uit
Perfectooo
Ik heb heb nu net een maandje en vind et een geweldig stukje techniek!!
Compact en houdt zich redelijk koel met extreem veel kracht en super heldere bass
Datum plaatsing: 2017-11-08
Can a remote lead be installed on GTR601
We would like to work with you directly to help you with your issue. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Datum plaatsing: 2018-10-16
Is this amp capable of running 8ohm subwoofers? If so what would be the wattage output at 8ohms?
The GTR-601 is not rated to run 8 ohm subwoofer since the wattage output would be really low and would not have enough power for the Bass to produce sound to give it a 'Bassy' feeling.
Datum plaatsing: 2018-06-14
what is the damping factor of the gtr 601 at 2ohms?
Hi! Unfortunately, we do not have this specification. However, we do know that the damping factor is well over 100. We are currently working to find the exact number for this Product.
Datum plaatsing: 2018-02-28
Hi ! Does this gtr-601 works in 4ohm 380w rms with a magnat subwoofer 4 ohm 400w rms ?? Doesnt is it ( AMP) too low power for subwoofer , and then will gonna be distorsions over 75%-80% amp volume ? Thanks a lot ! Have a nice DAY jbl entire team !!!
Hi, There would not be any problem with having the Amp power up the Sub since the Sub can handle 400W. It would depend on the source as distortion normally is an indicator for you to turn your volume down a little. There are separate level controls for the subwoofer(not all subwoofers have one) and the amp. Try minimizing the knob for the sub and check if that does the trick.
Datum plaatsing: 2017-12-19
I am buying 2 JBL CLUB WS 1200. What would be the best amp to run these 2 subs
You can run the 2 JBL Club WS 1200 with the JBL GTR-601 amplifier. The GTR-601 will drive 600WRMS through all the channels and since you will be using 2 Subs it will be distributed evenly with 300W per sub. The Club WS 1200 can handle 250W with a 1000W peak power handle, so as long as you don't push the volume up to the hilt the speaker should be good.
Datum plaatsing: 2018-01-09
Can I wire up a single Alpine SWR-10d2 to this amp at 4 ohms?
As long as the Alpine SWR-10d2 can handle 380Wrms at 4 ohms, it will work fine with the GTR-601.
Datum plaatsing: 2017-12-02
When wiring a single 4 ohm dvc subwoofer @ 2 ohms, do you bridge the GTR-601 to get 600 watts RMS or just use either set of outputs?
This is a mono amplifier, so there is no possibility for bridging. The two sets of speaker terminals are simply for convenience, in case you want to connect two speakers to this single-channel amp. So, to answer your question, if you are connecting only one speaker at 2 ohms, you can connect it to one speaker terminal on the amp, and you will be good to go.
Datum plaatsing: 2017-12-02
Can I adjust the power output? Because it outputs 600W at 2ohms, its too much for one S3-1224, or is it better to go with gtx500?
The S3-1224 handles up to 500W at 2/4 ohms. The GTX-500 would be a better fit since it drives 500W at 2-ohms.
Datum plaatsing: 2017-12-02